TOSHIBA TECRA A10-1E1 Laptop Keyboard, TECRA A10-1E1 keyboards
![]() Click for more pictures |
||
|
||
Keyboards for TOSHIBA TECRA A10-1E1
![]() Click for more pictures |
||
|
||
Keyboards for TOSHIBA TECRA A10-1E1
![]() Click for more pictures |
||
|
||
Keyboards for TOSHIBA TECRA A10-1E1
![]() Click for more pictures |
||
|
||
TOSHIBA TECRA A10-1E1 keyboards tags: Tecra A9-ST9001 , Satellite A35 laptop keyboard , TOSHIBA Satellite A45 laptop keyboard , Satellite M4 laptop keyboard , Satellite A120 , Satellite A1135 laptop keyboard , Satellite A4 , Satellite A45 laptop keyboard , TOSHIBA Satellite M4 laptop keyboard , Satellite S205 , Satellite 2000 , Satellite A60 laptop keyboard , Satellite P35 , Satellite 1870 laptop keyboard , Satellite S1130 laptop keyboard , Satellite A4 laptop keyboard , Satellite A2 laptop keyboard , TOSHIBA Satellite M40X , TOSHIBA Satellite M3 , Equium M70 , Satellite A7 , Satellite P25 , Satellite A8 , Satellite A120 , Satellite S2 , Satellite A8 , Satellite P35 , Satellite P25 laptop keyboard
Our keyboards are original from the keyboard manufacturer, We provide 100% genuine and brand new keyboard to replace your TOSHIBA TECRA A10-1E1 keyboard. We back each purchase with a 100% Satisfaction Guarantee, so buy with confidence.
Your attention please:
Please firstly compare the picture with your TOSHIBA TECRA A10-1E1 keyboard before you place an order, especially the ribbon cable (position, length and width). Make sure that the model of laptop and part number of TECRA A10-1E1 keyboard is the right one you need as well as the layout version. If you are still not sure after a comparation, or want to know more about the TOSHIBA TECRA A10-1E1 laptop keyboard, please contact us.
TOSHIBA TECRA A10-1E1 notebook keyboard installation notice:
- To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the laptop computer.
- The key caps on the keyboard are fragile, easily dislodged, and time-consuming to replace. Exercise care when removing and handling the TECRA A10-1E1 keyboard.
- Before securing the latch on the system board connector, ensure that the TOSHIBA TECRA A10-1E1 laptop keyboard connector is seated and the tabs on the connector are properly aligned with the slots on the system board connector. Failure to align the tabs could result in a malfunction of the laptop or damage to the cable and/or the cable connector.






















